1 Azbox + fw Neutrino Loader v1.0 AZBox HD

ATENÇAO  FIRMWARE NEUTRINO HD OFICIAL LOADER + FW



In order to install Neutrino HD over official Firmware please follow the steps below.
Download Neutrino HD software package which contains patch.bin and neutrino.bin fi le inside.
*Copy patch.bin file to your USB Memory stick (FAT32 formatted)
*Put the USB Stick into AZBox device and start the updating procedure trough Settings menu or by
turning off and then turning on your AZBox.
*When initial software is installed, your AZBox will displayed IP address. (Note: for Ultra model, you
have to note the IP address from the Settings menu or from your router, as it doesn’t have display).
*Run Neutrino Loader 1.1 (which You downloaded from www.azbox.com) and enter the IP address
(which was shown before) int the IP address field of Neutrino Loader 1.1. Press button Upload.
Once Upload button is pressed, Neutrino Loader will ask you to specify which file you want to be
loaded.Please, select neutrino.bin file from Neutrino HD package (which You downloaded from www.
azbox.com)
*After this flashing procedure starts, please wait until Neutrino Loader confirm you that performing
operations are finished.
*When you get the confirmation message from Neutrino Loader, please remove the USB memory stick from you Azbox.


1 Azbox + fw Neutrino Loader v1.0 AZBox HD




2 Azbox + fw Neutrino Loader v1.0 AZBox HD




3 Azbox + fw Neutrino Loader v1.0 AZBox HD




LOADERS 1.1

Loader 1.1:


896547 Azbox + fw Neutrino Loader v1.0 AZBox HD


 FIRMWARE

Neutrino HD v1.0 [Premium, Premium HD+, Elite, Ultra

 896547 Azbox + fw Neutrino Loader v1.0 AZBox HD

Fonte site oficial  azworld